Programming A New Code on My Lock (2023 and Newer)

1. Hold down the code reset button until you get a beep. 
2. Type in your NEW CODE and press "LOCK"
3. Again, type in your NEW CODE and press "LOCK" - this will complete the programming.
4. To verify that your new code is working, enter your new code and press the "LOCK" or "UNLOCK" button.  The keypad should confirm the accepted code by actuating the deadbolt.  

Notes:

*If programming is unsuccessful, repeat the steps above.

*QuickLock Feature - Hold the "LOCK" button down for 2 seconds to engage.

*Silent Feature - Hold down the number "1" button for 3-5 seconds until the lock beeps. Repeat to reactivate the sound. 

Tags: program, programming, new code, keypad, Atlas, key code