L Bracket and Nut Installation

1. Remove the lock from the door.
2. Remove the top and bottom paddle screws 
3. Pull the front paddle straight out.
4. Put the "L" bracket on and then put the securing nut on
5. While holding in the spring loaded pin, put the front paddle back into place
6. Screw the the top and bottom paddle screws in
7. Make sure the lock is put together and works 
8. Reinstall it on the door.

Note: You can put a small amount of Locktite on the securing nut after step 4 to prevent the nut from coming loose.

Pictures:

     L Bracket and Nut                     Top and bottom paddle screws               Front Paddle Removed               

Frond Paddle and Spring loaded pin

Tags: Nut fell off, Handle came out, lock came apart, pieces fell out,